9009H4 End Buckle/Tab Blowout/Vent Test Station for Beverage Ends
Images
Click Image to enlarge and scroll through photos
Description
The MODEL 9009H4 End Buckle / Tab Blowout / Vent Test Station is used to determine the pressure at which
unseamed beverage ends fail. Failure pressure is registered upon buckle or tab blowout of the free end. The 9009H4
also has the ability to perform vent tests, in which the test is terminated upon the opening of the tab.
Operation
An appropriate set of Change Parts, determined by the end being tested and the test performed, are installed in the
unit and the sample clamped in place. When buckle testing or tab blowout testing, a test sequence is initiated and the
end is pressurized at a specified rate until it fails; the pressure at which the end failed is indicated on the front-panel
mounted digital display. When vent testing, a test sequence is initiated and the end is pressurized to a specified pressure.
The pressure is held momentarily, then the tab is opened automatically via the fixture located in the test area.
CHANGE PARTS
This unit requires the use of Change Part #. Click Change Part number for further information.
Features
3 FUNCTIONAL TESTS IN ONE UNIT
SPC "IN CONTROL" RATED
FREE END FAILURE RESEMBLES SEAMED
END FAILURE
MICROPROCESSOR CONTROL OF TEST
HIGH RESOLUTION DIGITAL DISPLAY
RS-232 COMMUNICATIONS CAPABILITY
QUICK CHANGE OF TEST PARAMETERS
FOR OPERATOR EASE OF USE
Click here to view PDF of complete product information.